Smart padlock manufacturer fingerprint padlock compact size suitable for bags luggages lockers gifts
Product Description
Specification
|
Material
|
Zinc Alloy
|
|
Size
|
88MM(L)X 55MM(W)X 25MM(H)
|
|
Maximum Fingerprint Contain
|
20
|
|
Times of unlocking(fully charged)
|
about 2000 times
|
|
Average Recognition Time
|
<0.5sec
|
|
Charging voltage
|
5V
|
|
Weight
|
203g
|
|
Waterproof Rate
|
IPX3
|
Installation Instructions
1.Register Your Fingerprint
Firstly,long press the leftside USB set key for 3 seconds until the sound"Bi Bi Bi" is heard,with a bright blue light on and then release the key.Then,the long bright blue light means to wait for supervisor's fingerprint to authorise new users,and the supervisor presses the finger sensor to authorise.
Note:The first three groups fingerprints refer to the supervisor's fingerprints. When the supervisor authorises successfully,the buzzer rings"Bi,Bi,Bi" with a bright green light on.Then a flickering blue light means the new user can register fingerprints,when the right fingerprint is registered,the green light flickers with a "Bi"sound,if it fails,the red light flickers.Users need to register several sides of fingerprints on the same finger,after four times registered correctly, the padlock hints "Bi,Bi,Bi" sound with flickering green light,now it means it is registered successfully.
2.How To Delete Fingerprint
Users need to long press the USB left key for 10 seconds,until the alarm "Bi Bi Bi" rings for 3 times,with the red light flcikers,then,users can release the key. Wait for 2-3 seconds,when the sound "Bi Bi Bi" rings,and green light flickers,all fingerprints are deleted completely.
Firstly,long press the leftside USB set key for 3 seconds until the sound"Bi Bi Bi" is heard,with a bright blue light on and then release the key.Then,the long bright blue light means to wait for supervisor's fingerprint to authorise new users,and the supervisor presses the finger sensor to authorise.
Note:The first three groups fingerprints refer to the supervisor's fingerprints. When the supervisor authorises successfully,the buzzer rings"Bi,Bi,Bi" with a bright green light on.Then a flickering blue light means the new user can register fingerprints,when the right fingerprint is registered,the green light flickers with a "Bi"sound,if it fails,the red light flickers.Users need to register several sides of fingerprints on the same finger,after four times registered correctly, the padlock hints "Bi,Bi,Bi" sound with flickering green light,now it means it is registered successfully.
2.How To Delete Fingerprint
Users need to long press the USB left key for 10 seconds,until the alarm "Bi Bi Bi" rings for 3 times,with the red light flcikers,then,users can release the key. Wait for 2-3 seconds,when the sound "Bi Bi Bi" rings,and green light flickers,all fingerprints are deleted completely.